激情综合丁香-激情综合六月-激情综合婷婷亚洲图片-激情综合图区-激情综合网五月

主題：Em9280內核升級到3.9.7后JP1失效

  共有38043人關注過本帖    
客人
 1樓


Em9280內核升級到3.9.7后JP1失效  發帖心情 Post By：2013-9-27 21:09:00   [只看該作者]

今天升級內核到3.9.7后發現JP1失效，不管JP1是否短接糸統一直處于Debug狀態。請問是何原因?

  單帖管理 | 引用 | 回復 回到頂部
x10
 2樓


  發帖心情 Post By：2013-9-27 22:02:00   [只看該作者]

能把啟動信息貼出來看看嗎？謝謝。

  單帖管理 | 引用 | 回復 回到頂部
客人
 3樓


  發帖心情 Post By：2013-9-28 15:07:00   [只看該作者]

以下為JP1短接時的啟動信息：
[root@EM9280 /]#

U-Boot 2013.04 (Sep 03 2013 - 14:35:15)

CPU:   Freescale i.MX28 rev1.2 at 454 MHz
BOOT:  NAND, 3V3
DRAM:  128 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

->lcd_ctrl_init 0x47f34000
lcd_ctrl_init: splashimage->0x47000000
readsplashbmp: -> 800*480
mxs_chip_type: it's iMX283
In:    serial
Out:   serial
Err:   serial
Net:  0
Booting from nand ...

NAND read: device 0 offset 0x400000, size 0x400000
 4194304 bytes read: OK

NAND read: device 0 offset 0xa00000, size 0x20000
 131072 bytes read: OK
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   linux-2.6
   Created:      2013-09-10   6:42:01 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3709440 Bytes = 3.5 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Kernel Image ... OK
OK
   Loading Device Tree to 47a79000, end 47a8132b ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.9.7 (hl@hl) (gcc version 4.4.1 (Sourcery G++ Lite
 2009q3-67) ) #241 Tue Sep 10 14:06:29 CST 2013
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Freescale i.MX28 (Device Tree), model: Emtronix EM9280
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag
es: 32512
[    0.000000] Kernel command line: console=ttyAMA0,115200 mtdparts=gpmi-nand:40
96k@0(boot),8192k@0x00400000(kernel),36864k@0x00c00000(rootfs),-@0x03000000(user
) ubi.mtd=2 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc coherent_p
ool=1024k
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 117360k/117360k available, 13712k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc066c1c8   (6545 kB)
[    0.000000]       .init : 0xc066d000 - 0xc0695054   ( 161 kB)
[    0.000000]       .data : 0xc0696000 - 0xc06d90f8   ( 269 kB)
[    0.000000]        .bss : 0xc06d90f8 - 0xc0c2b0a4   (5448 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, N
odes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] of_irq_init: children remain, but no parents
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 17895
6ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo
 Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.001858] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[    0.070960] pid_max: default: 32768 minimum: 301
[    0.071731] Mount-cache hash table entries: 512
[    0.079488] CPU: Testing write buffer coherency: ok
[    0.083065] Setting up static identity map for 0xc04c16e8 - 0xc04c1740
[    0.095440] devtmpfs: initialized
[    0.103176] pinctrl core: initialized pinctrl subsystem
[    0.109874] regulator-dummy: no parameters
[    0.113227] NET: Registered protocol family 16
[    0.117723] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.122926] Authentication pass!
[    0.206272] debug-gpio is NOT valid
[    0.206745] Serial: AMBA PL011 UART driver
[    0.207848] imx28-pinctrl 80018000.pinctrl: pin PWM1 already requested by 800
18000.pinctrl; cannot claim for 80074000.serial
[    0.207924] imx28-pinctrl 80018000.pinctrl: pin-113 (80074000.serial) status
-22
[    0.207972] imx28-pinctrl 80018000.pinctrl: could not request pin 113 on devi
ce 80018000.pinctrl
[    0.208046] ------------[ cut here ]------------
[    0.208124] WARNING: at drivers/pinctrl/pinmux.c:200 pin_free+0xd8/0xe4()
[    0.208159] Modules linked in:
[    0.208274] [<c000f5d0>] (unwind_backtrace+0x0/0xf4) from [<c00188e0>] (warn_
slowpath_common+0x4c/0x68)
[    0.208346] [<c00188e0>] (warn_slowpath_common+0x4c/0x68) from [<c0018918>] (
warn_slowpath_null+0x1c/0x24)
[    0.208407] [<c0018918>] (warn_slowpath_null+0x1c/0x24) from [<c02badac>] (pi
n_free+0xd8/0xe4)
[    0.208467] [<c02badac>] (pin_free+0xd8/0xe4) from [<c02bae60>] (pinmux_disab
le_setting+0xa8/0x11c)
[    0.208527] [<c02bae60>] (pinmux_disable_setting+0xa8/0x11c) from [<c02b8cf4>
] (pinctrl_put_locked+0xf4/0x140)
[    0.208584] [<c02b8cf4>] (pinctrl_put_locked+0xf4/0x140) from [<c02b9350>] (p
inctrl_put+0x40/0x50)
[    0.208650] [<c02b9350>] (pinctrl_put+0x40/0x50) from [<c0312638>] (pinctrl_b
ind_pins+0x84/0xb8)
[    0.208725] [<c0312638>] (pinctrl_bind_pins+0x84/0xb8) from [<c0305278>] (dri
ver_probe_device+0x68/0x234)
[    0.208787] [<c0305278>] (driver_probe_device+0x68/0x234) from [<c03054d8>] (
__driver_attach+0x94/0x98)
[    0.208845] [<c03054d8>] (__driver_attach+0x94/0x98) from [<c0303acc>] (bus_f
or_each_dev+0x6c/0x8c)
[    0.208904] [<c0303acc>] (bus_for_each_dev+0x6c/0x8c) from [<c030436c>] (bus_
add_driver+0x214/0x2b0)
[    0.208959] [<c030436c>] (bus_add_driver+0x214/0x2b0) from [<c0305ab0>] (driv
er_register+0x78/0x194)
[    0.209016] [<c0305ab0>] (driver_register+0x78/0x194) from [<c067e3b4>] (pl01
1_init+0x24/0x48)
[    0.209069] [<c067e3b4>] (pl011_init+0x24/0x48) from [<c00087a4>] (do_one_ini
tcall+0x30/0x180)
[    0.209126] [<c00087a4>] (do_one_initcall+0x30/0x180) from [<c066d298>] (kern
el_init_freeable+0xe8/0x1ac)
[    0.209203] [<c066d298>] (kernel_init_freeable+0xe8/0x1ac) from [<c04bcf04>]
(kernel_init+0x8/0xe4)
[    0.209262] [<c04bcf04>] (kernel_init+0x8/0xe4) from [<c0009408>] (ret_from_f
ork+0x14/0x2c)
[    0.210009] ---[ end trace 1b75b31a2719ed1c ]---
[    0.211649] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 226) is a PL01
1 rev2
[    0.725697] console [ttyAMA0] enabled
[    0.733426] ->em9280_gpio_i2c_init
[    0.737883] ->em9280_gpio_i2c_probe
[    0.741567] gpio-i2c gpio-i2c.8: gpio-i2c-rst[0x20] available, do a reset 100
us
[    0.749700] gpio-i2c gpio-i2c.8: initialized done: gpio_i2c_scl[0x28], gpio_i
2c_sda[0x29]
[    0.758234] ->em9280_ssp0_spi_init
[    0.762407] ->em9280_ssp0_spi_probe
[    0.767108] em9280-ssp0-spi 80010000.ssp: spi clock = 24000000 Hz
[    0.773431] ssp0_set_clk_rate: clock_divide 2, clock_rate 3, ssp_clk 24000000
, rate_actual 3000000, rate_requested 3000000
[    0.784649] em9280-ssp0-spi 80010000.ssp: initialized done: cs0[0x11], cs1[0x
15], cs2[0x1c]
[    0.826261] bio: create slab <bio-0> at 0
[    0.843860] mxs-dma 80004000.dma-apbh: initialized
[    0.859346] mxs-dma 80024000.dma-apbx: initialized
[    0.866631] 3P3V: 3300 mV
[    0.871571] usb0_vbus: 5000 mV
[    0.877224] SCSI subsystem initialized
[    0.882768] usbcore: registered new interface driver usbfs
[    0.888702] usbcore: registered new interface driver hub
[    0.894955] usbcore: registered new device driver usb
[    0.906482] pps_core: LinuxPPS API ver. 1 registered
[    0.911499] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giometti@linux.it>
[    0.921005] PTP clock support registered
[    0.934725] Switching to clocksource mxs_timer
[    1.168033] NET: Registered protocol family 2
[    1.177607] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    1.186299] TCP bind hash table entries: 1024 (order: 3, 36864 bytes)
[    1.194035] TCP: Hash tables configured (established 1024 bind 1024)
[    1.201111] TCP: reno registered
[    1.204466] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.211190] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.219928] NET: Registered protocol family 1
[    1.227563] RPC: Registered named UNIX socket transport module.
[    1.233835] RPC: Registered udp transport module.
[    1.238597] RPC: Registered tcp transport module.
[    1.243479] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.256836] audit: initializing netlink socket (disabled)
[    1.262997] type=2000 audit(1.030:1): initialized
[    1.342227] NFS: Registering the id_resolver key type
[    1.348498] Key type id_resolver registered
[    1.353032] Key type id_legacy registered
[    1.357502] jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
[    1.367018] msgmni has been set to 229
[    1.385371] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
49)
[    1.393260] io scheduler noop registered (default)
[    1.399584] ->mxs_pwm_probe
[    1.405649] Reconstructed video mode:
[    1.409563] 800x480 - 16bpp, hsync: 48 left: 40, right: 40, vsync: 2, upper:
30, lower: 13
[    1.417868] pixclk: 32000kHz
[    1.429733] mxsfb_set_par: 800x480 32bpp
[    1.434118] mxsfb 80030000.lcdif: initialized
[    1.440524] uart-pl011 80074000.serial: no DMA platform data
[    1.449534] 8006a000.serial: ttyS2 at MMIO 0x8006a000 (irq = 211) is a 8006a0
00.serial
[    1.459311] mxs-auart 8006a000.serial: Found APPUART 3.1.0
[    1.467633] 8006c000.serial: ttyS3 at MMIO 0x8006c000 (irq = 214) is a 8006c0
00.serial
[    1.477569] mxs-auart 8006c000.serial: Found APPUART 3.1.0
[    1.485918] 8006e000.serial: ttyS4 at MMIO 0x8006e000 (irq = 217) is a 8006e0
00.serial
[    1.495828] mxs-auart 8006e000.serial: Found APPUART 3.1.0
[    1.504320] 80070000.serial: ttyS5 at MMIO 0x80070000 (irq = 220) is a 800700
00.serial
[    1.514442] mxs-auart 80070000.serial: Found APPUART 3.1.0
[    1.522873] 80072000.serial: ttyS1 at MMIO 0x80072000 (irq = 223) is a 800720
00.serial
[    1.532895] mxs-auart 80072000.serial: Found APPUART 3.1.0
[    1.540483] ->em9280_gpio_probe
[    1.550030] <-em9280_gpio_probe: 0
[    1.553818] EM9280 SysInfo Driver
[    1.560040] EM9280 IRQ Driver
[    1.572881] em9280-ht45b0f-clock ht45b0f-clock.9: enable pwm7
[    1.588135] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 1
28MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
[    1.600548] Scanning device for bad blocks

  單帖管理 | 引用 | 回復 回到頂部
客人
 4樓


  發帖心情 Post By：2013-9-28 15:07:00   [只看該作者]


[ 1.615431] Bad eraseblock 21 at 0x0000002a0000
[ 1.620612] Bad eraseblock 22 at 0x0000002c0000
[ 1.776484] Bad eraseblock 362 at 0x000002d40000
[ 2.076302] 4 cmdlinepart partitions found on MTD device gpmi-nand
[ 2.082703] Creating 4 MTD partitions on "gpmi-nand":
[ 2.087825] 0x000000000000-0x000000400000 : "boot"
[ 2.103764] 0x000000400000-0x000000c00000 : "kernel"
[ 2.114869] 0x000000c00000-0x000003000000 : "rootfs"
[ 2.125839] 0x000003000000-0x000008000000 : "user"
[ 2.137314] gpmi-nand 8000c000.gpmi-nand: driver registered.
[ 2.174107] CAN device driver interface
[ 2.303721] libphy: fec_enet_mii_bus: probed
[ 2.312644] usbcore: registered new interface driver asix
[ 2.318402] usbcore: registered new interface driver ax88179_178a
[ 2.325042] usbcore: registered new interface driver cdc_ether
[ 2.331508] usbcore: registered new interface driver smsc95xx
[ 2.337590] usbcore: registered new interface driver net1080
[ 2.343771] usbcore: registered new interface driver cdc_subset
[ 2.350208] usbcore: registered new interface driver zaurus
[ 2.356400] usbcore: registered new interface driver cdc_ncm
[ 2.362261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.369811] Initializing USB Mass Storage driver...
[ 2.375172] usbcore: registered new interface driver usb-storage
[ 2.381381] USB Mass Storage support registered.
[ 2.394129] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.401489] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 2.429746] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.446290] hub 1-0:1.0: USB hub found
[ 2.450756] hub 1-0:1.0: 1 port detected
[ 2.467818] ci_hdrc ci_hdrc.1: EHCI Host Controller
[ 2.473250] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[ 2.499608] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[ 2.509889] hub 2-0:1.0: USB hub found
[ 2.513844] hub 2-0:1.0: 1 port detected
[ 2.521097] Freescale High-Speed USB SOC Device Controller driver (Apr 20, 20
07)
[ 2.533499] mousedev: PS/2 mouse device common for all mice
[ 2.543645] init_ISL1208: RTC status = 0x90
[ 2.547878] em9280_isl1208_init: RTC data ready -> get time data
[ 2.560141] isl1208: 2012-9-21 14:53:31
[ 2.564021] isl1208 time is set into system.
[ 2.571115] stmp3xxx-rtc 80056000.rtc: rtc core: registered 80056000.rtc as r
tc0
[ 2.580160] i2c /dev entries driver
[ 2.591510] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with hear
tbeat 19s
[ 2.603854] usbcore: registered new interface driver usbhid
[ 2.609708] usbhid: USB HID core driver
[ 2.615390] mxs-lradc 80050000.lradc: Touchscreen not enabled.
[ 2.633546] TCP: cubic registered
[ 2.636957] NET: Registered protocol family 17
[ 2.641743] can: controller area network core (rev 20120528 abi 9)
[ 2.648454] NET: Registered protocol family 29
[ 2.653134] can: raw protocol (rev 20120528)
[ 2.657767] can: broadcast manager protocol (rev 20120528 t)
[ 2.663753] can: netlink gateway (rev 20130117) max_hops=1
[ 2.670453] lib80211: common routines for IEEE802.11 drivers
[ 2.676797] Key type dns_resolver registered
[ 2.687947] EM9280 Expanded Serial Driver
[ 2.693993] ttyS6 HT45B0F found!
[ 2.701328] ttyS7 HT45B0F found!
[ 2.707944] ttyS8 HT45B0F found!
[ 2.717484] UBI: default fastmap pool size: 10
[ 2.722180] UBI: default fastmap WL pool size: 25
[ 2.726959] UBI: attaching mtd2 to ubi0
[ 3.342945] UBI: scanning is finished
[ 3.372268] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for b
ad PEB handling, reserved 16, need 19
[ 3.398749] UBI: attached mtd2 (name "rootfs", size 36 MiB) to ubi0
[ 3.405262] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 3.412243] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 3.418988] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 3.426030] UBI: good PEBs: 287, bad PEBs: 1, corrupted PEBs: 0
[ 3.432127] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128

[ 3.439442] UBI: max/mean erase counter: 4/2, WL threshold: 4096, image seque
nce number: 0
[ 3.447749] UBI: available PEBs: 0, total reserved PEBs: 287, PEBs reserved f
or bad PEB handling: 16
[ 3.457391] UBI: background thread "ubi_bgt0d" started, PID 39
[ 3.463976] UBI: default fastmap pool size: 30
[ 3.468471] UBI: default fastmap WL pool size: 25
[ 3.473414] UBI: attaching mtd3 to ubi1
[ 4.827676] UBI: scanning is finished
[ 4.857661] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for b
ad PEB handling, reserved 4, need 20
[ 4.874835] UBI: attached mtd3 (name "user", size 80 MiB) to ubi1
[ 4.881163] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.887996] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.894872] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.901924] UBI: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
[ 4.907889] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128

[ 4.915194] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image seque
nce number: 0
[ 4.923634] UBI: available PEBs: 0, total reserved PEBs: 640, PEBs reserved f
or bad PEB handling: 4
[ 4.932920] UBI: background thread "ubi_bgt1d" started, PID 40
[ 4.939045] stmp3xxx-rtc 80056000.rtc: setting system clock to 2012-09-21 14:
53:33 UTC (1348239213)
[ 5.255366] UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
[ 5.262499] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes
: 2048 bytes/2048 bytes
[ 5.271859] UBIFS: FS size: 32251904 bytes (30 MiB, 254 LEBs), journal size 4
571136 bytes (4 MiB, 36 LEBs)
[ 5.281694] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 5.286810] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B1B21653-E3C9-
4D15-AEE4-B701B19194EB, small LPT model
[ 5.306929] VFS: Mounted root (ubifs filesystem) readonly on device 0:12.
[ 5.323647] devtmpfs: mounted
[ 5.327821] Freeing init memory: 160K
[ 6.473550] udevd (47): /proc/47/oom_adj is deprecated, please use /proc/47/o
om_score_adj instead.
ln: fb0: File exists
[ 7.513364] UBIFS: background thread "ubifs_bgt1_0" started, PID 52
[ 7.667558] UBIFS: recovery needed
[ 7.980331] UBIFS: recovery completed
[ 7.985458] UBIFS: mounted UBI device 1, volume 0, name "data"(null)
[ 7.992069] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes
: 2048 bytes/2048 bytes
[ 8.001403] UBIFS: FS size: 78725120 bytes (75 MiB, 620 LEBs), journal size 3
936256 bytes (3 MiB, 31 LEBs)
[ 8.011235] UBIFS: reserved for root: 3718382 bytes (3631 KiB)
[ 8.017131] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B5EE70D4-E1C6-
4153-99FF-B065BF51DD2C, small LPT model
net.ipv4.ip_forward = 1
Debug State:1
copy userinfo.txt ...
1
2
3
4
5
6
Fail
IPAddr:192.168.1.81
SubnetMask:255.255.255.0
DefaultGateway:192.168.1.1
[ 14.833976] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=80
0f0000.etherne:00, irq=-1)
mount -t nfs -o nolock 192.168.1.209:/d/public /mnt/nfs
[ 16.831315] libphy: 800f0000.etherne:00 - Link is Up - 100/Full
mount: RPC: Unable to receive; errno = Connection refused
  單帖管理 | 引用 | 回復 回到頂部
客人
 5樓


  發帖心情 Post By：2013-9-28 15:11:00   [只看該作者]

以下為JP1斷開時的啟動信息：

[root@EM9280 /]#


U-Boot 2013.04 (Sep 03 2013 - 14:35:15)

CPU:   Freescale i.MX28 rev1.2 at 454 MHz
BOOT:  NAND, 3V3
DRAM:  128 MiB
NAND:  128 MiB
*** Warning - bad CRC, using default environment

->lcd_ctrl_init 0x47f34000
lcd_ctrl_init: splashimage->0x47000000
readsplashbmp: -> 800*480
mxs_chip_type: it's iMX283
In:    serial
Out:   serial
Err:   serial
Net:   FEC0 [PRIME]
Warning: FEC0 usin
running mode

Hit any key to stop autoboot:  0
Booting from nand ...

NAND read: device 0 offset 0x400000, size 0x400000
 4194304 bytes read: OK

NAND read: device 0 offset 0xa00000, size 0x20000
 131072 bytes read: OK
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   linux-2.6
   Created:      2013-09-10   6:42:01 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3709440 Bytes = 3.5 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Kernel Image ... OK
OK
   Loading Device Tree to 47a79000, end 47a8132b ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.9.7 (hl@hl) (gcc version 4.4.1 (Sourcery G++ Lite
 2009q3-67) ) #241 Tue Sep 10 14:06:29 CST 2013
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Freescale i.MX28 (Device Tree), model: Emtronix EM9280
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag
es: 32512
[    0.000000] Kernel command line: console=ttyAMA0,115200 mtdparts=gpmi-nand:40
96k@0(boot),8192k@0x00400000(kernel),36864k@0x00c00000(rootfs),-@0x03000000(user
) ubi.mtd=2 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc coherent_p
ool=1024k
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Memory: 128MB = 128MB total
[    0.000000] Memory: 117360k/117360k available, 13712k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc066c1c8   (6545 kB)
[    0.000000]       .init : 0xc066d000 - 0xc0695054   ( 161 kB)
[    0.000000]       .data : 0xc0696000 - 0xc06d90f8   ( 269 kB)
[    0.000000]        .bss : 0xc06d90f8 - 0xc0c2b0a4   (5448 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, N
odes=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] of_irq_init: children remain, but no parents
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 17895
6ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo
 Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.001859] Calibrating delay loop... 226.09 BogoMIPS (lpj=1130496)
[    0.070953] pid_max: default: 32768 minimum: 301
[    0.071742] Mount-cache hash table entries: 512
[    0.079531] CPU: Testing write buffer coherency: ok
[    0.083108] Setting up static identity map for 0xc04c16e8 - 0xc04c1740
[    0.095486] devtmpfs: initialized
[    0.103228] pinctrl core: initialized pinctrl subsystem
[    0.109923] regulator-dummy: no parameters
[    0.113296] NET: Registered protocol family 16
[    0.117799] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.123003] Authentication pass!
[    0.206385] debug-gpio is NOT valid
[    0.206853] Serial: AMBA PL011 UART driver
[    0.207953] imx28-pinctrl 80018000.pinctrl: pin PWM1 already requested by 800
18000.pinctrl; cannot claim for 80074000.serial
[    0.208033] imx28-pinctrl 80018000.pinctrl: pin-113 (80074000.serial) status
-22
[    0.208081] imx28-pinctrl 80018000.pinctrl: could not request pin 113 on devi
ce 80018000.pinctrl
[    0.208159] ------------[ cut here ]------------
[    0.208240] WARNING: at drivers/pinctrl/pinmux.c:200 pin_free+0xd8/0xe4()
[    0.208273] Modules linked in:
[    0.208388] [<c000f5d0>] (unwind_backtrace+0x0/0xf4) from [<c00188e0>] (warn_
slowpath_common+0x4c/0x68)
[    0.208457] [<c00188e0>] (warn_slowpath_common+0x4c/0x68) from [<c0018918>] (
warn_slowpath_null+0x1c/0x24)
[    0.208517] [<c0018918>] (warn_slowpath_null+0x1c/0x24) from [<c02badac>] (pi
n_free+0xd8/0xe4)
[    0.208578] [<c02badac>] (pin_free+0xd8/0xe4) from [<c02bae60>] (pinmux_disab
le_setting+0xa8/0x11c)
[    0.208635] [<c02bae60>] (pinmux_disable_setting+0xa8/0x11c) from [<c02b8cf4>
] (pinctrl_put_locked+0xf4/0x140)
[    0.208692] [<c02b8cf4>] (pinctrl_put_locked+0xf4/0x140) from [<c02b9350>] (p
inctrl_put+0x40/0x50)
[    0.208758] [<c02b9350>] (pinctrl_put+0x40/0x50) from [<c0312638>] (pinctrl_b
ind_pins+0x84/0xb8)
[    0.208832] [<c0312638>] (pinctrl_bind_pins+0x84/0xb8) from [<c0305278>] (dri
ver_probe_device+0x68/0x234)
[    0.208894] [<c0305278>] (driver_probe_device+0x68/0x234) from [<c03054d8>] (
__driver_attach+0x94/0x98)
[    0.208952] [<c03054d8>] (__driver_attach+0x94/0x98) from [<c0303acc>] (bus_f
or_each_dev+0x6c/0x8c)
[    0.209010] [<c0303acc>] (bus_for_each_dev+0x6c/0x8c) from [<c030436c>] (bus_
add_driver+0x214/0x2b0)
[    0.209064] [<c030436c>] (bus_add_driver+0x214/0x2b0) from [<c0305ab0>] (driv
er_register+0x78/0x194)
[    0.209121] [<c0305ab0>] (driver_register+0x78/0x194) from [<c067e3b4>] (pl01
1_init+0x24/0x48)
[    0.209174] [<c067e3b4>] (pl011_init+0x24/0x48) from [<c00087a4>] (do_one_ini
tcall+0x30/0x180)
[    0.209232] [<c00087a4>] (do_one_initcall+0x30/0x180) from [<c066d298>] (kern
el_init_freeable+0xe8/0x1ac)
[    0.209308] [<c066d298>] (kernel_init_freeable+0xe8/0x1ac) from [<c04bcf04>]
(kernel_init+0x8/0xe4)
[    0.209366] [<c04bcf04>] (kernel_init+0x8/0xe4) from [<c0009408>] (ret_from_f
ork+0x14/0x2c)
[    0.210096] ---[ end trace 1b75b31a2719ed1c ]---
[    0.211730] 80074000.serial: ttyAMA0 at MMIO 0x80074000 (irq = 226) is a PL01
1 rev2
[    0.725788] console [ttyAMA0] enabled
[    0.733554] ->em9280_gpio_i2c_init
[    0.738013] ->em9280_gpio_i2c_probe
[    0.741703] gpio-i2c gpio-i2c.8: gpio-i2c-rst[0x20] available, do a reset 100
us
[    0.749824] gpio-i2c gpio-i2c.8: initialized done: gpio_i2c_scl[0x28], gpio_i
2c_sda[0x29]
[    0.758354] ->em9280_ssp0_spi_init
[    0.762518] ->em9280_ssp0_spi_probe
[    0.767222] em9280-ssp0-spi 80010000.ssp: spi clock = 24000000 Hz
[    0.773537] ssp0_set_clk_rate: clock_divide 2, clock_rate 3, ssp_clk 24000000
, rate_actual 3000000, rate_requested 3000000
[    0.784757] em9280-ssp0-spi 80010000.ssp: initialized done: cs0[0x11], cs1[0x
15], cs2[0x1c]
[    0.826280] bio: create slab <bio-0> at 0
[    0.843878] mxs-dma 80004000.dma-apbh: initialized
[    0.859438] mxs-dma 80024000.dma-apbx: initialized
[    0.866723] 3P3V: 3300 mV
[    0.871656] usb0_vbus: 5000 mV
[    0.877318] SCSI subsystem initialized
[    0.882879] usbcore: registered new interface driver usbfs
[    0.888810] usbcore: registered new interface driver hub
[    0.895038] usbcore: registered new device driver usb
[    0.906549] pps_core: LinuxPPS API ver. 1 registered
[    0.911563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giometti@linux.it>
[    0.921081] PTP clock support registered
[    0.934785] Switching to clocksource mxs_timer
[    1.168213] NET: Registered protocol family 2
[    1.177800] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    1.186489] TCP bind hash table entries: 1024 (order: 3, 36864 bytes)
[    1.194222] TCP: Hash tables configured (established 1024 bind 1024)
[    1.201295] TCP: reno registered
[    1.204651] UDP hash table entries: 256 (order: 2, 20480 bytes)
[    1.211368] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[    1.220112] NET: Registered protocol family 1
[    1.227763] RPC: Registered named UNIX socket transport module.
[    1.234037] RPC: Registered udp transport module.
[    1.238800] RPC: Registered tcp transport module.
[    1.243682] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.257023] audit: initializing netlink socket (disabled)
[    1.263203] type=2000 audit(1.030:1): initialized
[    1.342358] NFS: Registering the id_resolver key type
[    1.348633] Key type id_resolver registered
[    1.353168] Key type id_legacy registered
[    1.357633] jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
[    1.367148] msgmni has been set to 229
[    1.385477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
49)
[    1.393367] io scheduler noop registered (default)
[    1.399680] ->mxs_pwm_probe
[    1.405736] Reconstructed video mode:
[    1.409645] 800x480 - 16bpp, hsync: 48 left: 40, right: 40, vsync: 2, upper:
30, lower: 13
  單帖管理 | 引用 | 回復 回到頂部
客人
 6樓


  發帖心情 Post By：2013-9-28 15:11:00   [只看該作者]


[    1.417948] pixclk: 32000kHz
[    1.429777] mxsfb_set_par: 800x480 32bpp
[    1.434173] mxsfb 80030000.lcdif: initialized
[    1.440565] uart-pl011 80074000.serial: no DMA platform data
[    1.449556] 8006a000.serial: ttyS2 at MMIO 0x8006a000 (irq = 211) is a 8006a0
00.serial
[    1.459330] mxs-auart 8006a000.serial: Found APPUART 3.1.0
[    1.467666] 8006c000.serial: ttyS3 at MMIO 0x8006c000 (irq = 214) is a 8006c0
00.serial
[    1.477596] mxs-auart 8006c000.serial: Found APPUART 3.1.0
[    1.485937] 8006e000.serial: ttyS4 at MMIO 0x8006e000 (irq = 217) is a 8006e0
00.serial
[    1.495833] mxs-auart 8006e000.serial: Found APPUART 3.1.0
[    1.504326] 80070000.serial: ttyS5 at MMIO 0x80070000 (irq = 220) is a 800700
00.serial
[    1.514442] mxs-auart 80070000.serial: Found APPUART 3.1.0
[    1.522854] 80072000.serial: ttyS1 at MMIO 0x80072000 (irq = 223) is a 800720
00.serial
[    1.532881] mxs-auart 80072000.serial: Found APPUART 3.1.0
[    1.540469] ->em9280_gpio_probe
[    1.550104] <-em9280_gpio_probe: 0
[    1.553891] EM9280 SysInfo Driver
[    1.560133] EM9280 IRQ Driver
[    1.573008] em9280-ht45b0f-clock ht45b0f-clock.9: enable pwm7
[    1.588191] NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 1
28MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64
[    1.600607] Scanning device for bad blocks
[    1.615426] Bad eraseblock 21 at 0x0000002a0000
[    1.620655] Bad eraseblock 22 at 0x0000002c0000
[    1.776941] Bad eraseblock 362 at 0x000002d40000
[    2.076471] 4 cmdlinepart partitions found on MTD device gpmi-nand
[    2.082876] Creating 4 MTD partitions on "gpmi-nand":
[    2.087999] 0x000000000000-0x000000400000 : "boot"
[    2.103905] 0x000000400000-0x000000c00000 : "kernel"
[    2.114995] 0x000000c00000-0x000003000000 : "rootfs"
[    2.125976] 0x000003000000-0x000008000000 : "user"
[    2.137467] gpmi-nand 8000c000.gpmi-nand: driver registered.
[    2.174138] CAN device driver interface
[    2.303770] libphy: fec_enet_mii_bus: probed
[    2.312707] usbcore: registered new interface driver asix
[    2.318468] usbcore: registered new interface driver ax88179_178a
[    2.325098] usbcore: registered new interface driver cdc_ether
[    2.331559] usbcore: registered new interface driver smsc95xx
[    2.337650] usbcore: registered new interface driver net1080
[    2.343835] usbcore: registered new interface driver cdc_subset
[    2.350268] usbcore: registered new interface driver zaurus
[    2.356463] usbcore: registered new interface driver cdc_ncm
[    2.362324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.369881] Initializing USB Mass Storage driver...
[    2.375232] usbcore: registered new interface driver usb-storage
[    2.381446] USB Mass Storage support registered.
[    2.394180] ci_hdrc ci_hdrc.0: EHCI Host Controller
[    2.401530] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[    2.429804] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[    2.446353] hub 1-0:1.0: USB hub found
[    2.450813] hub 1-0:1.0: 1 port detected
[    2.467894] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    2.473332] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[    2.499668] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[    2.509984] hub 2-0:1.0: USB hub found
[    2.513937] hub 2-0:1.0: 1 port detected
[    2.521203] Freescale High-Speed USB SOC Device Controller driver (Apr 20, 20
07)
[    2.533610] mousedev: PS/2 mouse device common for all mice
[    2.543769] init_ISL1208: RTC status = 0x90
[    2.548001] em9280_isl1208_init: RTC data ready -> get time data
[    2.560234] isl1208: 2012-9-21 14:56:1
[    2.564027] isl1208 time is set into system.
[    2.571113] stmp3xxx-rtc 80056000.rtc: rtc core: registered 80056000.rtc as r
tc0
[    2.580165] i2c /dev entries driver
[    2.591493] stmp3xxx_rtc_wdt stmp3xxx_rtc_wdt: initialized watchdog with hear
tbeat 19s
[    2.603808] usbcore: registered new interface driver usbhid
[    2.609658] usbhid: USB HID core driver
[    2.615348] mxs-lradc 80050000.lradc: Touchscreen not enabled.
[    2.633630] TCP: cubic registered
[    2.637035] NET: Registered protocol family 17
[    2.641825] can: controller area network core (rev 20120528 abi 9)
[    2.648531] NET: Registered protocol family 29
[    2.653209] can: raw protocol (rev 20120528)
[    2.657847] can: broadcast manager protocol (rev 20120528 t)
[    2.663834] can: netlink gateway (rev 20130117) max_hops=1
[    2.670526] lib80211: common routines for IEEE802.11 drivers
[    2.676878] Key type dns_resolver registered
[    2.688030] EM9280 Expanded Serial Driver
[    2.694079] ttyS6 HT45B0F found!
[    2.701411] ttyS7 HT45B0F found!
[    2.708016] ttyS8 HT45B0F found!
[    2.717557] UBI: default fastmap pool size: 10
[    2.722260] UBI: default fastmap WL pool size: 25
[    2.727038] UBI: attaching mtd2 to ubi0
[    3.343599] UBI: scanning is finished
[    3.372726] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for b
ad PEB handling, reserved 16, need 19
[    3.399219] UBI: attached mtd2 (name "rootfs", size 36 MiB) to ubi0
[    3.405733] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.412708] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.419588] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.426500] UBI: good PEBs: 287, bad PEBs: 1, corrupted PEBs: 0
[    3.432581] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128

[    3.439890] UBI: max/mean erase counter: 4/2, WL threshold: 4096, image seque
nce number: 0
[    3.448195] UBI: available PEBs: 0, total reserved PEBs: 287, PEBs reserved f
or bad PEB handling: 16
[    3.457841] UBI: background thread "ubi_bgt0d" started, PID 39
[    3.464422] UBI: default fastmap pool size: 30
[    3.468920] UBI: default fastmap WL pool size: 25
[    3.473849] UBI: attaching mtd3 to ubi1
[    4.826963] UBI: scanning is finished
[    4.856812] UBI warning: print_rsvd_warning: cannot reserve enough PEBs for b
ad PEB handling, reserved 4, need 20
[    4.874020] UBI: attached mtd3 (name "user", size 80 MiB) to ubi1
[    4.880347] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    4.887181] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    4.894054] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    4.901108] UBI: good PEBs: 640, bad PEBs: 0, corrupted PEBs: 0
[    4.907072] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128

[    4.914376] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image seque
nce number: 0
[    4.922815] UBI: available PEBs: 0, total reserved PEBs: 640, PEBs reserved f
or bad PEB handling: 4
[    4.932107] UBI: background thread "ubi_bgt1d" started, PID 40
[    4.938233] stmp3xxx-rtc 80056000.rtc: setting system clock to 2012-09-21 14:
56:03 UTC (1348239363)
[    5.255749] UBIFS: mounted UBI device 0, volume 0, name "rootfs", R/O mode
[    5.262881] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes
: 2048 bytes/2048 bytes
[    5.272242] UBIFS: FS size: 32251904 bytes (30 MiB, 254 LEBs), journal size 4
571136 bytes (4 MiB, 36 LEBs)
[    5.282085] UBIFS: reserved for root: 0 bytes (0 KiB)
[    5.287202] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B1B21653-E3C9-
4D15-AEE4-B701B19194EB, small LPT model
[    5.307306] VFS: Mounted root (ubifs filesystem) readonly on device 0:12.
[    5.324089] devtmpfs: mounted
[    5.328260] Freeing init memory: 160K
[    6.474271] udevd (47): /proc/47/oom_adj is deprecated, please use /proc/47/o
om_score_adj instead.
ln: fb0: File exists
[    7.513738] UBIFS: background thread "ubifs_bgt1_0" started, PID 52
[    7.666963] UBIFS: recovery needed
[    7.980413] UBIFS: recovery completed
[    7.985518] UBIFS: mounted UBI device 1, volume 0, name "data"(null)
[    7.992125] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes
: 2048 bytes/2048 bytes
[    8.001456] UBIFS: FS size: 78725120 bytes (75 MiB, 620 LEBs), journal size 3
936256 bytes (3 MiB, 31 LEBs)
[    8.011287] UBIFS: reserved for root: 3718382 bytes (3631 KiB)
[    8.017178] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B5EE70D4-E1C6-
4153-99FF-B065BF51DD2C, small LPT model
net.ipv4.ip_forward = 1
Debug State:1
copy userinfo.txt ...
1
2
3
4
5
6
 Fail
IPAddr:192.168.1.81
SubnetMask:255.255.255.0
DefaultGateway:192.168.1.1
[   14.833956] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=80
0f0000.etherne:00, irq=-1)
mount -t nfs -o nolock 192.168.1.209:/d/public /mnt/nfs
[   16.831389] libphy: 800f0000.etherne:00 - Link is Up - 100/Full
mount: RPC: Unable to receive; errno = Connection refused
[root@EM9280 /]#
  單帖管理 | 引用 | 回復 回到頂部
客人
 7樓


  發帖心情 Post By：2013-9-28 15:19:00   [只看該作者]

您好，我前面已經把JP1短接和斷開的啟動信息都貼出來了。我感覺JP1還是起作用的，若不斷接JP1，啟動時進不了U-Boot，短接后按“空格”可進入U-Boot。勞駕分析一下是何原因。

  單帖管理 | 引用 | 回復 回到頂部
x10
 8樓


  發帖心情 Post By：2013-9-28 16:52:00   [只看該作者]

啟動信息里，顯示配置有錯。請問你EM9280的版本號是多少，原來的是Linux-2.6.35還是CE6.0的？我們明天把最新的內核放到網上，你下載后再試試。如果還是不成功，就只有麻煩把板子寄回，我們幫你做好。

  單帖管理 | 引用 | 回復 回到頂部
x10
 9樓


  發帖心情 Post By：2013-9-29 9:03:00   [只看該作者]

我們查了一下記錄，你手上的估計還是v3版本的，只有v4板子才能支持3.9.7升級。請把這張板子寄回，我們給你更換，謝謝。

  單帖管理 | 引用 | 回復 回到頂部
x10
 10樓


  發帖心情 Post By：2013-9-29 21:12:00   [只看該作者]

被告之升級成功，congratulations!

  單帖管理 | 引用 | 回復 回到頂部

返回首頁

Em9280內核升級到3.9.7后JP1失效

用戶名：
            驗證碼： 驗證碼,看不清楚?請點擊刷新驗證碼
內容：
主站蜘蛛池模板： 精品视频专区| 一级色视频| 91精品国产爱久久久久久| 亚洲人成伊人成综合网久久| 亚洲欧美一区二区三区九九九| 国产精品4p露脸在线播放| 国产精品国产三级国产an不卡| 一本一道久久a久久精品综合| 毛片视频大全| 欧美一级毛片兔费播放| 美国一级做a爰片性色毛片| 国产亚洲精品成人a在线| 亚洲 欧美 日韩 综合| 三级网战| 亚洲产在线精品第一站不卡| 免费高清观看青青草原| 国产精品精品视频| 国产成人久久综合二区| 2022国产情侣真实露脸在线| 中文字幕日本在线视频二区| 欧美aaa级片| 国产高清www免费视频| 2048国产精品原创综合在线| 国产欧美日韩在线视频| 日韩欧美视频免费观看| 69黄色片| 又黄又爽又猛大片录像| 午夜精品久久久久久久99| 你懂的网址免费国产| 国产成人资源| 黄色一级视频在线播放| 国产成人亚洲综合无| 国产一区二区三区高清| 日韩大尺度无遮挡理论片| 99久久免费国产精精品| 日本成人黄色片| 亚洲成a人片在线观看www| 在线观看一级毛片| 欧美一级做一a做片性视频| 国产成人精品综合久久久软件| 国产精品久久久亚洲456|